Introduction to the relevant knowledge points of pneumatic winches
Release time:
2022-03-14
The pneumatic winch is ideal for construction, offshore, and marine applications. It is suitable for drilling operations in potentially explosive, high-temperature, and humid environments, such as drilling platforms, pipeline platforms, and blowout preventer platforms. Let's take a look at it together.
Pneumatic Winchis ideal for construction, offshore, and marine applications. It is suitable for drilling potential explosions, high temperature, and humid environment operations, such as drilling platforms, pipeline platforms, and blowout preventer platforms.
Pneumatic winches offer optional features such as remote control hoists, drum guards, aviation accessories, and construction fixtures. These winches are designed to work in harsh environments, with low maintenance costs, high reliability of gear motors, high torque output, and smooth start and stop. Pneumatic winches are tested before leaving the factory and installation and commissioning options are provided as required.
Pneumatic winches are powered by compressed air, not electricity. Air is delivered from the air compressor to the motor drive of the pneumatic winch through air ducts. When starting, the motor driving the pneumatic winch begins to supply power to the drum, effectively lifting or reducing the load on the connection.Pneumatic WinchOperation and Maintenance
1. Do not disassemble the parts of the tool at will, as this will not only affect the safety of the operator but also damage the tool.
2. If a tool shows some minor faults or fails to achieve its original social function after use, it should not be used anymore and should be checked immediately. Regular inspections and maintenance management of tools should be organized (about once a week), adding grease to rotating parts such as bearings and oil to pneumatic motor components.
3. When using various tools, you need to comply with various safety regulations and operating instructions.
Choose the right working tools. Tools that are too large may cause injury, while tools that are too small may cause damage.
5. The import pressure of the tool (excluding the outlet pressure of the air compressor) is generally 90 psig (6.2 kg/cm2). Too high or too low will damage the performance and service life of the tool.
Pneumatic WinchThe inspection work before operation is as follows: Check whether the bolts of each hinge part are loose, whether the pins are loose; check whether the oil quality of each smooth part is qualified, whether the oil quantity is sufficient, and whether there is oil leakage; check the working brake of the braking system, check whether the safety door is sensitive and reliable, whether the gap, stroke, and wear meet the requirements; check whether the action of various safety protection devices is accurate and reliable; check whether various instruments and lighting signals are clear and accurate; check whether the temperature of the main motor meets the requirements, etc., and the inspection needs to be careful.
RELATED INFORMATION
